All boots come with a 3D molded shell tongue that offers a strong forward lean support and gives a proper fit to the boot. It’s perfect for directly transmitting energy from your foot to the board.
These allow the boot to have a more consistent flex, plus they avoid pressure points on the ankle when flexing forward.
The Ankle Flex Notch allows a boot to flex without distortion or pinching.
A foot is thinner on the lateral toe side than on the medial side. This is why our liners come with an asymmetric toe shape – for the perfect anatomic fit.
Entry-level liner for rookies learning the ropes, this pre-molded liner offers a super cozy fit.
LACE UP: Push the knob in and turn for an effortless tightening and a comfortable fit. UNLACE: Just pull the knob to pop and unlock. The Dynamic Closure system is a replaceable miniature high tensile stainless steel cable that runs through the lace guides with minimal friction for perfect pressure distribution and a micro-adjusting fit.
This is the fastest, most comfortable way to lace a BOA boot. The advantage of the Coiler is the integrated auto-tightening of the tension cable – it’s quick in and quicker out. You immediately have more comfort and control, which translates to higher performance.
A unique, centrally located cable routing system for the BOA boot that allows evenly distributed tightening to both the upper and lower sections of your boot. This powerful system greatly improves the fit over the entire foot and specifically locks in your heel due to the centrally located cable guide design over the ankle.
The Cuff Cut eliminates bulging and deformation of the shell and smooth forward flex.
The Double Power Strap is a unique feature developed by HEAD for improved power and support. By simply tightening the strap at the top of the boot, the nature of its design means the closure force doubles around your calf providing impressive calf hold and therefore adding awesome power to your turns.
To tighten, just pull the inner liner lace with just one hand... and it locks itself! To release, simply pull the tongue loop forward. It doesn’t get much easier than this.
This lightweight padding has been heat molded to follow the contours of the foot and ankle. It improves fit and flex while not compromising performance.
The Eyestay Bow Cut in the ankle area compliments the Cuff Cut on the shell - preventing the liner from distorting when flexing forward. Having no bulges avoids wrinkles and pressure points.
The FPG (Foot Precise Guidance) insole features a cupped heel shape and curved arch under your instep, providing you with maximum support for your entire foot. No more cramping means a more fun riding!
Our FPT (Foot Power Transmission) insole is put together using 3 different densities for maximum performance: 1) A stiffer material that surrounds your heel for that locked-in heel grip feel. 2) A shock absorbing pad under the heel where you need it most to soak up heavy landings and to keep your feet relaxed on hard packed days. 3) A softer forefoot construction giving additional comfort and keeping your hard working toes warm all day long.
We applied μ-func lining mesh to our insoles: it’s proven to be 3°C warmer compared to standard lining meshes.
μ-func lining mesh is a highly technical fiber that reflects your body heat, which is why we use it in the toe areas of our liners to keep your feet warmer than ever.
HTS is an injection molded cup which wraps around the heel of the boot and locks into the binding’s highback for precision interaction between rider/boot/bindings and board.
Our high-precision foam offers precise power transmission with a great fit. This breathable foam helps to keep your feet dry when sweating. Essential for a slip-free fit and warm feet when mercury heads south.
This combination of lacing and BOA is the best of both worlds. Have the tight and dependable fit of a traditional lace with a BOA-guided strap over the instep to keep your heel locked in like never before. Fast and precise.
Hybrid Lacing is a combination of a lace secured with the Easylock on the lower section and a Velcro collar strap on the liner’s cuff. Individually adjust the liner’s sectiona with precision according to your needs.
This socket construction around the liner’s heel works just like an ankle brace: the outer mesh wraps around the foot and offers additional support to your ankles.
The Lite is a lightweight EVA rubber sole that offers maximum grip in all snow conditions.
Breathable L-shaped pads in the heel wrap around your anklebone to keep your feet in place and protect your ankles you pressure points.
These are designed to be strong and durable while allowing you to get the most precise, personalized fit thanks to their independent grip to the laces.
Custom-mold our liners by heating them up in-store or at home and then step into them so they take the shape of your feet. The ultimate glove-like fit.
The Moonwalker provides supreme grip, dampening and stability. Inner rubber studs conform and grip on all surfaces giving, while the main frame offers support and stability.
Just when you thought it could not get any better, the Moonwalker SA Pro takes soles to the next level! All the amazing features from the SA sole, but with dual density shock absorbing pads under your heel and toes for the best in board
feel and impact protection.
This is Head’s premium women’s sole, featuring outstanding grip and stability as well as shock-absorbent pads under both the heel and toe, to make riding that much more comfortable for the girl who goes big.
In addition to the grip and stability of the Moonwalker the Moonwalker SA also includes a highly effective shock-absorbing cushion in the heel to suck up hard landings.
In addition to the grip and stability of the Moonwalker W the Moonwalker SA W also includes a highly effective shock-absorbing cushion in the heel to suck up hard landings.
The Moonwalker W sole provides supreme grip, dampening and stability for women. Inner rubber studs conform and grip on all surfaces giving, while the main frame offers support and stability.
The tongue extends all the way into the toebox. No overlapping means no pressure points on your toes.
Fine-tune the liner’s toebox volume by adding/removing EVA pads to the Power Transmission Pocket. It provides great support for the toes when doing heelside turns.
Skate-styled with a Vulcanized look and embracing our roots with the pretzel tread, this sole unit has a shock-absorbing EVA heel cushion to take the sting out of landings.
Head’s premium sole has the skate-inspired Vulcanized look with visible EVA cushioning throughout for the best impact absorption in the line. The material is tough as hell and the pretzel-shaped tread not only reflects our German roots, they offer great grip for hiking.
Panels on the bottom of the outsole reflect the cold temperature back to the snow and help keep your feet warm.
Slick Fit Straps wrap the liner for a super snug fit when the lace is tightened. They keep your feet in place and reduce any heel lift.
The Soft Top eliminates pressure on the back of the leg while allowing for a more natural and comfortable heelside flex to the boot.
The SSL System (Single SpeedLock) comes in it’s second generation with a super precise open/closure mechanism, designed to be the fastest, smoothest and most efficient speed lacing system available today. Simply pull the single lace grip tight, then push the lever on the tongue down to lock your lace in place. That’s it! You are now ready to ride!
This system marries the smooth convenience of our new SSL II speedlace with the precision lockdown of BOA over the ankle. Heel hold can be adjusted externally on the fly and it’s so secure we can dispense with lacing on the lower liner for the easiest entry and exit around.
The SSL II System (Single SpeedLock) comes with a super precise lace lock mechanism that’s designed to be the fastest, smoothest and most efficient speed lacing system on the market. Simply pull the single lace grip tight, push the lever on the tongue down to lock your lace in place. And that’s it – Go shred!
The Stylite sole has EVA in the midsole to minimize weight and overlaid lightweight mesh for maximum grip where needed. The result is the best lightweight sole that Head have ever made, with ultimate control and comfort.
Our Thermo Insole is made from lightweight, yet super supportive EVA foam that provides great vibration dampening and comfort. The result is your feet will thank you for keeping them warm and cozy.
Metal loops and a Tetoron lace material make for easier sliding laces and an easier entry and exit. These liners are heat moldable, come with a 3D molded insole with a solid heelcup to avoid heel movement, and give proper arch support.
Our most advanced liner. The lower section has a Velcro strap to customize the width and a Power Transmission Pocket holds your toes down securely on heelside turns. Bamboo charcoal lining is natural and antimicrobial and the breathable foam used helps wick moisture away from your foot. A Collar Velcro strap allows you to crank it tight for direct power transmission and the triple density insole has a strong heelcup, significant arch support and a shock pad in the heel. Heat moldable too.
This liner dispenses with lower lacing (not needed because of IPS and Hybrid lacing on the shell) to eliminate pressure points and give even easier entry and exit without compromising on fit. It is custom heat moldable, the lining is made of natural antimicrobial Bamboo charcoal and there’s a 3D molded insole with a solid heelcup to prevent heel movement and give proper arch support.
We removed the lower lacing (not needed because of IPS and Hybrid lacing on the shell) to eliminate pressure points and allow easier entry. These are heat moldable, with a natural antimicrobial Bamboo charcoal lining and there’s a 3D molded insole with a solid heelcup to prevent heel movement and give proper arch support. Women also benefit from a lower heelside collar to accommdate women’s calves, soft ankle pads and a warm lining mesh.
Like the men’s version, we improved the lacing for an easier entry and exit. These are custom heat moldable, and come with a 3D molded insole and have a lower heelside collar to accommdate women’s calves.
A Velcro strap around the toebox allows you to adjust its width to avoid slipping in the boot if you have a narrow foot. Pull out the liner, tighten the strap according to your needs and step into the boot again. You will feel the difference.
The Women’s comfort system provides a comfier fit and more natural flex on heelside turns while the lower profile of the cuff is more ergonomic for a woman’s lower leg.
Our women’s heel pads are softer and thinner than the men’s pads, offering a female-specific cozy fit.